Monday 30 January 2012

A round-up of 1/72 scale Fw 190s -last edited January 2022



Above;  72nd scale Eduard Fw 190 A-5 'heavy fighter' 

Until the appearance of the Eduard Fw 190 kits in 72nd scale  the best small scale Fw 190 kit was almost certainly the Revell 1/72, especially as it is/was widely available and so much cheaper than the Hasegawa kits. At the last count I had built around 17 of them. There are/were a few 'issues' with the kit. In addition to the shape of the canopy (much less obvious than Hasegawa's 'flattened' effort) some modellers believe that Revell also got the cowl wrong. I have to say after carefully measuring the kit against some drawings and comparing it against some decent photographs I can't really see it. What do you think?

 ".....Revell moulded the front opening of the cowling too small. The error is quite large for the scale, being if I remember correctly around 2 mm. As a consequence, the front part of the cowling and the cowling ring tapers too much to meet the small opening. The negative effect is even more exaggerated by the model having its cowling slightly rounded in profile. All this gives the front part of the fuselage an unnaturally heavy "bulbous" look...."    





A few comparison shots, all current 1/72 Fw 190 kits. First up the Revell A-8/F-8 and that 'suspect' cowling x4. Generally a lovely little kit although recent production is displaying a fair amount of flash and the clear parts are no longer very clear at all. In fact they need ditching and the canopy replaced with a vac-form item. That requires some minor surgery - removing the rear canopy 'decking' moulded integrally with the fuselage halves. Aeroclub do (did?) a replacement canopy, along with a white metal 'unbulged' upper cowl for the A5-6 variants








Hasegawa A-5 finished in J.Gr Ost markings. The re-tooled Hasegawa kits are very good of course, although the new Dual combo boxings are retailing for upwards of £30 !! Two minor complaints - the overly long landing gear and a slightly misshapen canopy, it being slightly too 'rounded' where it meets the windscreen.





Italeri A-8 cowling (above) and the Academy A-6 below. I quite like the Italeri A-8 and their Dora. The Anton has raised panel detail and no dihedral on the wings unfortunately. The cockpit is quite good though. The Fw 190 A series are easily the worst kits Academy have done in 1/72 scale. Difficult to know where to start - wings, tail plane, cowl, undercarriage - in fact just don't bother is really the best advice with both their A-6 and A-8 boxings. Their Dora on the other hand is very good and doesn't share any parts wih the 'A' variant.







Airfix A-8 finished as Priller's 'Jutta' first issued in 1977. This was the best radial engine Fw 190 kit until the Hasegawa and Revell new tool. The outline was very accurate, although the surface detail featured raised lines and some rather soft cowl details and the kit is missing the cannon breech fairings on the wing upper surfaces - not at all a bad thing if you were thinking of adding an 'unbulged' cowl cover and back-dating to an A-6 or similar, as I have here with this model in the overall hellblau-grau markings of the night-fighter Staffel of JG 2, summer 1943..




Lots of new Fw 190s released since 2012. I am currently building my first 72nd scale Eduard 190. The 'new' tool Airfix A isn't bad at all ...and goes together easily - my latest with added FuG antennae in the markings of JG 300 ace Klaus Bretschneider - markings from EagleCals.


and the Zvezda A-4 on the shelf. Replacement wheels from True Detail, but yes, spoilt by some silly omissions..but for a 'snap-fit' kit, not bad at all..


That just leaves the Tamiya A-3 in this scale, along with the AZ Models and Mastercraft kits. The AZ kits include a resin wheel well insert and metal gun barrels and are thus three times the price of a Revell kit. They do look great in the box but I haven't built any of their range yet which includes an A-0 and an A-1 to A-4. AZ also supply a resin insert for the characteristic pointed antenna post of the A-4 tail fin. Will be starting one soon. Mastercraft look to be poor quality, although feature engraved panel lines and a half-decent decal sheet. And Quickboost (Aires) do a resin replacement cowl ring if you've a mind!






More 72nd scale Fw 190 builds on this blog;

Airfix new-tool Fw 190 A-8
http://falkeeinsmodel.blogspot.co.uk/2013/08/new-tool-airfix-fw-190-8-172.html

Zvezda Fw 190 A-4 in 72nd scale
http://falkeeinsmodel.blogspot.co.uk/2013/05/zvezda-fw-190-4-in-172-scale.html






1 comment:

  1. Falke Eins: Thanks for the comment you left on the 72 Land blog. Always nice to know someone is reading. I should point out that your site still provides the largest number of referrals to the blog and was one of the first to link up to it. So many thanks for that too!

    And keep up the postings on 1:72 models! :)

    Kevin Callahan

    ReplyDelete