Building the Airfix 72nd Swordfish with NO filler ! - finished

 

"some modelling skills required.."    This kit is not an especially difficult build but it does require care and patience - in fact it is a kit that once finished you can take a certain amount of pride in. I think it looks every inch a Swordfish and its pretty nicely detailed too. But I also know better modellers than me that have not managed to complete it - a bit tricky, too fiddly, impossibly large sprue gates making removal of the smallest parts rather awkward and short-shot struts for the wing centre section around which the entire wing assembly hinges. Plus not reading stage 44 of the instructions correctly - gear leg assembly!  Probably not a good idea either to do what I did and start rigging before having completed the assembly - tends to pull the wings out of alignment. And careful not to apply too much pressure on the wings during assembly otherwise you'll snap the struts!

..and for anyone trying to research colours for a 'Channel Dash' Swordfish, well, no one knows for sure, as there are no known photos. The Airfix box artwork features a machine finished in black distemper. All the photos I've ever seen show the distemper applied only to the undersurfaces of the Swordfish and Sky-Grey areas of the fuselage (or in this case Sky as they were Blackburn built). Note that nearly all profiles and kit artwork get the depiction of the codes wrong on both 825 Bismarck and 825 Channel Dash Swordfish. Codes were carried on the fin 1941-1942, not on the fuselage. The colour of the single letter codes was either black or dark red (it's not possible to be certain on the basis of available photos). The colour scheme as featured on the Xtradecal sheet is there or thereabouts, more or less...

Building ( & rigging) the Airfix Swordfish in 72nd scale (3)

 

..several disasters along the way - including snapping the outboard struts when cementing the wings as I squeezed them together. At that point the model nearly ended up in the bin. Too distraught to take a pic. But with a touch of super glue, repairs were quickly made. And so the Swordfish is nearly finished. 

Rigging!

I'm gradually getting the hang of this in 72nd scale - my third rigged biplane on this blog (in 11 years of posting) so I'm now feeling confident enough to provide a quick guide;

- drill locating holes with pin drill or similar in the wings/cowl/tailplane pre-assembly

- using a pin (drill) or similar apply viscous super glue to the hole and using pointed tweezers hold a length of nylon thread until the glue 'grabs' it.  Apply 'accelerator' with a thin brush to the area to speed up this part of the process. Ideally the model should be held in a clamp or similar, but I've always managed without one of these.

- if there's one tip to pass on here, it is always glue 'down'  - inverting the model for the top wings, or better, 'rigging' the lower half of the top wing during construction. The thread then hangs down towards the lower wing, so you are not competing with 'gravity' when glueing. Similarly, don't cut the thread too short - too much 'tension' and the thread won't grip as easily of course....

Building the Airfix Swordfish in 72nd scale with NO filler - build review (2)

 

Moving quickly along. The characteristic large bracing struts have gone in and the fit here is very good, they just click into place. The cowling assembles easily enough too and the engine fits neatly inside it and pushes into the front of the fuselage. 

But just when you think the build is going swimmingly you hit the landing gear struts. The pins on these appear not to fit all the way into the locating holes in the wing stubs. This may be intentional as they represent the undercarriage bars which are covered in a fairing, the fairing is not flush with the fuselage and the round bars are visible. Also at first sight they appear to be the only support for the lower wings so getting this bit right is going to be important. Note too that the frame part of the inner struts locates into the wing stub parts - when and if you've drilled/cut out the slot! 

Here I've drilled out those locating holes and inserted the leg strut which locates very poorly into the twin strut supporting the wheel and left everything to dry. 

Things are starting to go awry! I know I've located the strut incorrectly because I can no longer fit the inner strut frame into the wing stub! I tried to pull it out - but of course I'd used superglue. In the end I've cut through the bottom of the strut frame. And probably got a better supporting join for the lower wing outer section. Here's hoping!

As for the rigging, Airfix give no information which is a shame. A kind soul over on the BM  forum posted the rigging diagram provided by SBS in their etch rigging set - or some of it at least. Could be useful..

How to build the Airfix Swordfish in 72nd scale with NO filler ! - build review (1)

..Was going to write 'new-tool' ..but this kit was released in 2012! Now, one of the (largely unstated) aims of this blog is to build as many of the 'new' Airfix tools as possible and I really should have attempted this one before now. As it happens our club is embarking on a 'Channel Dash' diorama for next year's 80th anniversary so now is as good a time as any. 

First query - interior colours.

 The instructions say the cockpit should be H61 'flesh' - I guess that means varnished wood. Not quite. Interior visible fabric should be dark reddish-brown, " the colour of tautening dope.." according to friend Bob who had a long career as ground crew in the RAF. The flash has somewhat 'lightened' the reddish colour in the shot below. Not much is visible anyway.

 

Having read a number of other build reviews out there it seems that joining the fuselage halves might be a little tricky. I noticed a similar issue and a possible solution on the recent Spitfire Vc - glue the fuselage halves together first and insert the cockpit from underneath when you get to this stage. For the best join of the fuselage halves I glued the forward fuselage first, inserting the cockpit from below when dry, prior to sealing up the rear of the fuselage. This worked well..no filler required on the fuselage anywhere, unlike just about every other build out there on the net..

Given that  I always make a mess of the paint finish when rigging, I decided to rig as much as possible prior to painting. This is relatively straight forward for the tail feathers. Note that the rear fuselage machine gun trough section required no filler - unlike most other builds I've seen. The trough part fits into a u shaped slot in the rear bulkhead of the interior framework, but thanks to my method of joining the fuselage halves, there were no gaps! Note clear parts masked off on the lower forward fuselage  -before fitting wing struts as you won't easily be able to access them.

Some other points I've noted.. the fit for the wing 'stubs' is tricky. You need to push hard, but they do go into the small slot. In stage 14 you have to cut out a locating slot in parts 9C and 10C for wings deployed mode - for locating the struts in stage 44 ! ...which I failed to do. My fuselage centre section struts, parts 1B and 2B were 'short shots' making stage 19 particularly difficult! The insert section didn't fit into the upper wing centre section anyway! Part 7A locates into the front of the windscreen for stages 47 and 48. Looks obvious... after its been pointed out! Finally - for now - the support struts for the horizontal stabiliser attach via a unit which inserts beneath the tail. The fit here is poor and will need filling as do the gaps at the front of the fin on the top of the stabiliser, visible in the image below.

Airfix video - new tool De Havilland Vampire F.3 in 48th scale

 

A single click to view a presentation of the superb new-tool Vampire from Airfix

Easy 'seascape'

courtesy of 'vintage modeller' on twitter

Taking a break from the riveting to work on the base. Top Tip - PVA glue and a few sheets of toilet paper make a great seascape. I'll add more layers tomorrow when it drys out a bit. 👍😜 #battlingBeau pic.twitter.com/ONvGqE8ZaB

— Vintage Modeller (@VintageModeller) June 29, 2021

AZ Bf 109 G-6 'White 15' of 1./JG 300 - wilde Sau Limited Edition

 

Recently finished another 72nd AZ Gustav in the markings of 'White 15' of 1./JG 300 flown by Otto Leisner out of Bonn Hangelar during the summer of 1944 in the 'defence of the Reich'.