IBG Models Gotha Go 242 in 72nd build review - finished

 

Finished the IBG Models Gotha Go 242 in 72nd. Here it is on the table at last night's model club..

Not too happy with the mottles on the fuselage. I had them down nicely but then managed to flood one side and ending up re-spraying and re-spraying. I might try something else.. with a thin brush and very diluted paint.

IBG Models Gotha Go 242 build review (3)

 

..ready for painting using mostly Xtracolor enamels..

IBG Models Gotha Go 242 build review (2)

 

Gotha on its wheels (briefly for the picture) and almost ready for paint. Still plenty of smaller detail parts to be fitted but given that a certain amount of masking will be necessary, I've left these off..

Another view, with 72nd scale 109 in the picture. I've planned to pose the cargo ramp door open having replaced the plastic struts with some metal rod  (to the right, to be painted separately)

IBG Models Gotha Go 242 in 72nd

 

Here in the 'garden of England' we are in the middle of a week of 20 C/ 78 F sunshine, so the modelling stuff goes out into the garden. Just coming to the final stages of the new IBG Models Gotha Go 242. The build log is elsewhere but here's a view from the garden..

Rolf Pingel's Battle of Britain Kommandeur I./JG 26 machine - Hasegawa Me 109 E

 

Fourth completion of the year!

Hasegawa Me 109 - is there an easier build out there? Not sure though that I'm 100 % convinced by the shape of the nose. Decals from Kagero. Pingel's Emil was photographed during November 1940 - the blue of the fuselage now heavily mottled, although the machine still has large areas of yellow.  I used Xtracolor enamels. 

of course, once again the aerial isn't right. I've since replaced it with something a little more acceptable, although I hate wrestling with EZ Line. The trick here is to zap the super glue with accelerator ..

Hs 123 Airfix 'Vintage classic' - applying EZ line/AMMO rigging

 

 I finished this Hs 123 last year - but was always unhappy with the aerials. I decided to replace them  with EZ-line - and took a few new photos. Application technique has been 'refined' since my rigging efforts with the new-tool Airfix Swordfish and the Airfix Tiger Moth. Firstly, decant some accelerator into a lid. Next apply a drop with a cocktail stick to the anchor point. Then touch the EZ line aerial dipped in super-glue for instant results.