Showing posts with label F4U Corsair. Show all posts
Showing posts with label F4U Corsair. Show all posts

Saturday, 27 April 2019

Revell corsair F4U-1B 1846 NAS Fleet Air Arm, HMS Colossus, July 1945






Revell's 'Royal Navy' boxing of their 72nd F4U Corsair - 'difficulty level' 4 out of 5 for a 72nd scale fighter?  Well, that would be the nine-part wing and  the five-part cowl I guess. Difficult to get everything lined up neatly but with a bit of care it all goes together well enough. And at least the horrible white plastic of the first release has gone..

Love this machine and it looks great in 'Navy' roundels..and after all the Royal Navy was flying them off carriers first ..









The kit markings are an interesting choice on Revell’s part. They were presumably accurate at one point but despite the Zero falling away in flames on the box art, HMS Colossus never saw combat with the  British Pacific Fleet.. Those standard European theatre markings were on the ships aircraft when she left Glasgow , bound for Ceylon and ultimately Australia. BPF markings were applied either en route or in Australia. By the time Colossus left Australia on her first war cruise, hostilities had ended.

Below; a few views of Corsair KD 431 in the Fleet Air Arm museum, Yeovilton in its original glossy midnight blue albeit very scratched finish..see " Corsair KD 431 - the time capsule fighter " by David Morris for the story of this machine's restoration.










The subject of the Revell kit is KD 344, one of the final batch of 857 Goodyear built Corsairs, called the FG-1 Corsair IV in Fleet Air Arm use. It was delivered to the Fleet Air Arm and was embarked on board HMS Colossus after she completed her sea trials and sailed for Ceylon (Sri Lanka) on 12 March 1945.

 On 8th July 1945 KD 344 is reported as ending up in the barriers with Sub-Lt J.D. Garden RNVR flying when the hook jumped the arrestor wire. The Corsairs and Barracudas were offloaded on 17th January 1946 to Royal Naval Air Station Wingfield near Capetown, they were re-embarked in April. In July of the same year the Colossus was transferred on a 5 year loan to the French Navy as the Arromanches, which later became a permanent transfer.






 Senior Pilot of 1846 Sqn. was Lt. Henry Adlam. His memoir is entitled 'On and Off the Flight Deck'  and it is a fascinating insight into the life of a naval fighter pilot. Adlam takes part in many campaigns including Salerno, Escort carrier flying and the attacks on Palembang as a Hellcat pilot. Later he becomes a batsman and joins 1846 Sqn., based aboard HMS Colossus from 1945-1946. In June 1945 1846 Sqn joined the 14th Carrier Air Group to continue the fight against Japan. The Sqn. went to Australia but the war ended before the carrier and it's air group could take part in any operations. The Sqn. Corsairs were subsequently dumped at sea somewhere near Sydney. After ferrying many serviceman that had been POWs the carrier sailed for South Africa where the aircraft were temporarily based at Wingfield. It is here that many of 1846 Sqn's well known photos were taken.

Sunday, 27 November 2016

new tool 1:72nd Revell F4U Corsair - build review (2) - Jim Streig VF-17 ace






well, it was a new-tool when I first started this build in January 2015 - I guess no longer, now that I've just finished it in November 2016! ..another one rescued from the 'shelf of doom'..a neat kit, one or two little inaccuracies but nothing too major to worry about and apart from the nine-part wing went together quite well. finished in the markings of 'ace' Jim Streig of VF-17






As usual I've missed something out before proceeding to the 'photo-shoot' (prop stencils)  but still. I'm not much of a 'weatherer'  - this has been finished with some light oil washes ...especially to tone down the decals.







Part I of this build including the box/sprue shots is here If you want to watch a 'pro' modeller build and finish this kit then watch Dusan's video below, a single click to view here..





Tuesday, 20 January 2015

new tool 1:72nd Revell F4U Corsair - build review





...so following a pretty ordinary if not downright disappointing 2014 (in modelling terms) this is my first build of 2015- the new-tool Revell FU-1 Corsair. I was really looking forward to this kit, but, oh my, that terrible white plastic!

 first up, the plus points; fine surface detail, a detailed engine / cowling and cockpit, nice decals, a semi-reasonable fit and a sensible price tag. Negatives; unfortunately the kit has the two inner wing pylons of the F4U-1D, not the centre line pylon of the F4U-1A. There is a tear-drop shaped recess in the rear of the oil cooler inserts to take the pylons which are a little tricky to fill. The propeller blades have a 'cricket bat' shaped profile, instead of a 'baseball-bat' shape. I've seen some comments about fuselage length issues; compared especially to the plans in the Detail and Scale books.



  The build is a little tricky in some areas - 9 parts for the wing and some awkward joins are the result. Also the wingtip joint forms the outer edge of the aileron hinge. The cowling ring match up with the two cowling sides is a little tricky too, leading to some more filling and sanding. The main gear has no positive placement for the strut support which was a problem, particularly as these are added 'blind' with the wings together. I could not find a position in which, when they were mated with the gear legs, gave the correct 90 degree alignment for the latter.

 As I said above, a pretty ordinary kit, which was a little disappointing. Even if you aren't really worried by any potential shape issues - it certainly looks like a Corsair - a straight-forward build would have been nice. This certainly isn't really one of those. Conversely, the Corsair enthusiast will probably not worry overly if he has to put a bit of care in, but he is likely to be concerned at any possible dimensional inaccuracies. So to some extent  this Revell new-tool falls between two stools a bit. Probably only a 7/10





Tuesday, 27 July 2010

Hasegawa F4U-1 Corsair 1/72



Taking pics of your models serves to highlight the defects ! Wing leading edge needs some more attention and I've omitted the prop blade decals for some reason. That prop also need some touching up. F4U-1 finished in the markings of Lt. Merl Davenport's "Lonesome Polecat". Davenport was a six-vic ace with VF-17. Kagero decals. Kit national insignia salvaged thanks to a coat of liquid decal film.


Tuesday, 20 July 2010

Hasegawa F4U Corsair 1/72 VF-17 Jolly Rodgers

..pulled this old Hasegawa Corsair out of the stash for a quick OOB build - thing is there is no box, no instructions and only a very old decal sheet. £2 from under somebody's table at the Medway show. Will dig out some Kagero refs and a decal sheet for a VF-17 machine as per this OFMC example (?) photographed at DX. And just in case I get stuck Rob ('Basic Modelling') has done a video build ...just one click to view here.