Showing posts with label 72nd scale. Show all posts
Showing posts with label 72nd scale. Show all posts

Saturday, 14 November 2026

Airfix Typhoon FGR.4 'Starter Set' build review

 






.. Airfix have been getting so much 'flak' recently that people all over 'social media' are starting to jump to their defence - maybe they should go and build this kit instead! Airfix have excelled themselves with this one... a 'Starter set' that no beginner modeller will ever be able to complete to a reasonable standard! 

And it wasn't just the parts missing from the box either - in this instance, the nose wheel and one undercarriage gear door! That's 3 out of the last four Airfix kits I've built that have had parts missing.

But aside from those issues this kit just did not go together well for me..it was a real struggle just to get the fuselage halves aligned at all. The canopy needed a lot of work (and filler in the gaps) and the wing roots and tail fin also needed work.

Another of the kit's 'problems' are the poor location points for the gear legs. Lots of superglue required. The main legs are also missing the hefty retraction struts. And the very prominent landing lights - the toolmaker had to stop somewhere of course. The total absence of any underwing stores is also disappointing, not to mention the minimalist decal sheet. The Airfix Tribute Forum suggested that this may have been a deliberate choice to make the Typhoon less 'war-like' putting the emphasis more on it's airshow display prowess. Having seen a German Typhoon in the air ahead of the Rafale at the Paris Air Show last year I can get that.. In the end I took some AMRAAMs from the Revell kit (.. to take out those Argie F-16s as they may well do one day) and got the Mark I decals for machines from the Falklands RAF 1435 Flight. 

Bottom line - I wouldn't bother with this Airfix Series 1 effort - for much the same price you can get the Revell kits.






A few views of the almost completed Typhoon FGR 4 Airfix model in its Falklands 1435 Flt livery. This is one of the four jets based at Mount Pleasant on the islands, coded "F". A few bits of detail painting still to go. FOD covers - its a big intake and there's nothing there - were pieces of suitably-painted foil.






From the dynamicvectors web site; 

" Based at Mount Pleasant Airfield, 1435 Flight operates four Typhoons out of a hardened complex known as ‘The Devil’s Lair’. The four jets carry the tail codes F, H, C and D; a tradition which has endured since the days of the Phantom FGR.2s and continued through the Tornado F.3 era to the modern-day Typhoon. Named Faith, Hope, Charity and Desperation, the jets hold Quick Reaction Alert (QRA) duties to protect the skies for the people of the Falkland Islands . To anyone wishing to test those defences… Beware the Devil’s Lair…"






a few quick AI backgrounds - as usual it gets a few details wrong and modifies the aircraft even when the 'prompt' expressly forbids it from modifying the aircraft.  Note the size of the 'sheep' in the lower image!





Tuesday, 27 October 2026

Get the 'sit' of your Fw 190 right..




An SG 3 Fw 190 A. Click to view in full screen mode. (ECPA-D KBZ 24 F327)




Most modellers know what a Focke Wulf 190 looks like, don't they? Why then do they go and do this? Beautifully finished in the makings of the 'Eismeer' Geschwader JG 5, but with nothing done about the ridiculously elevated stance. I don't even blame the modeller here really, this is down to the kit, probably another Eduard iteration.... 



Perhaps the thought of surgery on the gear legs was too awful to contemplate, perhaps the modeller had to get the kit finished for the table (photo taken at the IPMS West Norfolk show back in June) and put it together OOTB. Not only do the gear legs have to be shortened, they have to be raked forwards and obviously inwards. Looking down on the wing from directly above you should be able to see the wheels ahead of the wing leading edge. Yet model companies - especially Eduard - continue to produce Fw  (and Me 109) undercarriage under no compression - as if you ever see them like this ..anywhere.. All you really have to do is take a mm or three out of the leg and glue it back together, perhaps inserting a small metal pin. Easy enough to do using a hand-twist micro drill...If you need to slightly 're-position' the leg in the well to rake it forward use a small circular spare part, a 'ring' to locate it..the sort of part you attach to the back of a prop to stop it falling out of an engine. Small enough to sit in the gear well and take an undercarriage leg.

 Here's another recent completion of the Airfix 1:72 Fw 190. I used the EagleCals JG 5 Eismeer decal sheet. Obviously gear leg 'surgery' is a little less daunting in the smaller scale and probably isn't really necessary on the Airfix.. but I did it anyway...


    

Above; Fw 190 with Stammkennzeichen (factory radio code) TI+DQ was an Fw 190 A-1. In the sequential block allocations used by the Luftwaffe, this specific four-letter registration code was painted on the fuselage sides of the early A-series production model during its factory and acceptance testing phases before being assigned to a combat unit. It is part of the same factory code sequence that included nearby prototypes and early testing blocks, such as the TI+IG and TI+IH codes used on the Jumo-engined high-altitude Fw 190 V-prototypes. Note in this view the inward 'cant' of the starboard leg in particular. 

Below; A few more Focke Wulfs seen at the same IPMS show - what do you think about the 'sit' on these ?

At the ECPA-D photographic archive in Paris, the 'fonds allemand' (German collection)  has a host of PK images taken during early 1944 in the East. This image shows a Focke Wulf Fw 190 F-8 of SG 3 being bombed up. Click on the image to view in full screen mode. From the KBZ 240 files. 



Tuesday, 4 August 2026

Building the new-tool Airfix Junkers Ju 52

 



A few modellers have already built and/or are building the new Ju 52 just released. Here are some screen shots from Luke's video at Mach Models (video link below; great model, superbly filmed) and some pics from Jonty at IPMS East Kent. Incidentally some of Luke's work is on display at Hannants in Colindale close by the RAF museum, Hendon. 

The new Airfix Ju 52 has a good level of cockpit detail - features include rudder pedals, control yokes, the central instrument panel with throttle levers and radio equipment/sets behind the forward bulkhead. Internal 'cargo' space can be configured with Airfix-supplied oil drums and/or seating. The rear bulkheads visible  fill the space below/around the gunners' position. The internal 'corrugations' are well done and the bracing framework is also featured. Note the 'single-part' roof in the image below.




The lower fuselage and the top roof are available as single parts avoiding a central join/split and there are two large spars built into the lower section to support the wings.



Some screen shots from the Mach Models video below. Note less than 10 minutes of Luke's video are devoted to construction which appears absolutely 'painless'. 













Below; A single click on the red square to watch the full video here. 


Saturday, 18 July 2026

Changes at Airfix and a look at their 1:72 Bf 109 F-4 'Starter Set'


Following on from Luke's departure to Revell, Head of Brand at Airfix Dale Luckhurst has been pushed out (or jumped ship before being pushed) and gone to Heller. Dale has been replaced by a marketing whizz ( and former wedding bridal dress store owner allegedly) according to what you can read on the Web   Apparently the brand appears to be undertaking cost cutting measures, perhaps anticipating a sale by the owners of Airfix? Some of the planned 2026 releases also allegedly appear to have been ditched.  After my issues with their new releases (missing sprues in the Wessex box, Blenheim canopy glazing irredeemably cracked, no replacement available, missing parts in the Typhoon FGR 4) my Airfix 'loyalty' is maybe now slowly starting to wane....... 


So just time to mention that the Bf 109 F (Friedrich) starter set I've just finished was really not worth the effort. Lacking in detail and finesse - as perhaps a 'starter set' requires - this 109 carries on the Airfix 'tradition' of being unable to give us a really decent small scale Bf 109. It of course builds easily enough, but looks slightly 'under-sized' to me. A pilot figure is included in lieu of cockpit detail. The single overall dark green colour scheme is unfortunately complicated with large areas of yellow decal which will probably be hard to apply and look much better painted, albeit tricky for a' beginner'. Subject of the kit is a Jabo Jagd-bomber of III. /JG 77 on the Eastern Front taking out some T-34s - but the kit does not feature a bomb rack or any ordnance. As the new Gruppe had to have a Jabo-Staffel (a fighter squadron that could occasionally operate as a light bomber with a 250 kg bomb under its belly), 7. Staffel was designated to fulfill this role. The decal option in the kit provides the markings for 7./JG 77 Staffelkapitän Wolf-dieter Huy and includes his rudder scoreboard - he was awarded the Ritterkreuz- and the unit's ' wolf's head cowl emblem. You also get a stand for your nearly £12 outlay, which when compared to its Eduard 'equivalent', seems a little over-priced too. A poor 4 out of 10 is my rating. Seen on the table at Shepway Military Modelling Society club night, first Monday of the month at the Hawkinge Battle of Britain Museum... 








Saturday, 20 June 2026

Great War SIG at West Norfolk IPMS show




.. first post taking in the SIGs at last week's IPMS West Norfolk show. These fine 1:72 models are all the work of Mr Steve Cox. Although there were no triplanes on the table until I pointed it out. Note that Steve doesn't rig his builds - his 'philosophy' is that building model kits should be 'for fun' and rigging is not fun! Note that some of these 72nd scale models like the Friedrichshafen and Gotha bombers are vac-forms!  That doesn't sound like fun either to be honest!









Tuesday, 14 April 2026

Finnish B-239 Buffalo from the 'classic' Airfix 72nd kit

 



The ancient 1:72 Airfix Buffalo is a poor kit. Turning it into a Finnish machine is to be honest a bit of a pointless exercise - everything needs work. But then again, everything needs work anyway. Here I've built up the cowl - drilling out the cooling apertures and relocating the MGs to those little bulges on the top - lengthened the forward fuselage with card and putty by several mms, revamped the cockpit with an instrument panel and head/back armour and substituted the propeller for an item out of the spares box that actually looked like it might have belonged on an aeroplane! The opening canopy section had to be 'plunge-moulded' to actually get something to fit in the open position and I used decal strip for the framing. The raised detail was sanded down and a bit of rescribing undertaken - not my favourite task.The lumps of plastic that pass for exhausts on the kit were removed and replacements installed on the bottom of the cowl. The tail wheel was replaced with something from the spares box. Decals came from an old Colarado sheet. Just to make things worse I used Humbrol 24 for the yellow Eastern Front theatre markings - and it refused to dry! Still to add the pitot but this one is done..