Now that the replacement sprue has arrived from Airfix (yes, see above - an entire sprue was missing from the sealed, bagged kit!) I can get on with the build of my 'Walter'!
.jpg)
Note on the internal painting of the cabin - blue seats and pea green on the sound quilting. You could usefully add some belt detail, but I have not. Grime it up a bit with an oil wash and a bit of dry-brushing. Good details, including the interior frame and the heating duct, but 27 build stages before closing up the fuselage is probably asking for trouble.
In the cockpit Airfix provide a choice of instrument panels, one with raised detail or a flat part with decal. Shame that the decal doesn't really look like the real thing. Colour call-outs for the cockpit parts are non-existent - I've done mine in a dark grey, but should probably be black. Note the prominent windscreen wiper motors on the framing behind the panel.
Fitting the cockpit and the cabin roof is fiddly and a very tight fit! A fair bit of fettling required ..and then - despite the okay-ish dry-fit - I couldn't get the fuselage halves together around the nose. I had this issue on the 48th P-51. Despite this, the fit of the windscreen/canopy is not bad, but might need a little sanding to avoid a 'step'. The canopy will take some time to mask - but certainly no worse than a Ju 88!
Sprue attachment points are very large and usually on the mating surfaces which makes clean-up a little tricky. Otherwise another notable point about the kit is the tremendous amount of surface detailing - hoist power feed sockets, power take-off points down the fuselage under the pilots door etc. The so-called 'beetle-back' is well done and the prominent cooling louvres are featured after a fashion. The representation of the mesh covers is pretty well done and there is a basic gearbox with torque links.
Folded or flying options are available, folded looks neat with the cradle attachment in bright red.
More soon...
No comments:
Post a Comment