2x Revell Me 262 A-1a in 72nd, 'striped' 'Green 1' flown by Maj. Rudolf Sinner of the Stab III./JG 7, March 1945

My latest two finishes. Took a week off last week and got, not one, but two, Revell Me 262s done. Mold is looking a bit tired now, the canopy was so poor in one of the kits that I ended up doing a replacement one with a piece of clear plastic and a candle..which was a first for me..

Sinner's machine (Gkr. III./ JG 7)  is finished in the two greens (Xtracolor and WEM enamels) and VI+AF is an early production a/c with nose-wheel scissor link and clear part at the bottom of the rudder...

2 x Revell Me 262 in 1:72 - 'striped' 'Green 1' flown by Maj. Rudolf Sinner of the Stab III./JG 7, March 1945

I had started an Academy and Revell dual Me 262 build but put them aside to focus on the Airfix Typhoon. Progress on the Academy Me 262 has been non-existent but I have picked up and started a second Revell Me 262 after encountering a problem with the canopy in the first one. I quite like the Revell 262 but somewhere along the line they've altered the mold, replacing the original three-part canopy and rear decking with a new plastic part and a single-part canopy - which is a terrible fit and on my example had a nasty crack in it, quite apart from being far from transparent. I've since decided to smash-mold a new 'clear' part using a candle and clear plastic food container lid and cut it into three to replicate the 'older' mold of this kit - and decided to finish the second Revell kit at the same time. In these pictures I have attached the windscreen and the rear of the canopy with some 'Glue n' glaze'. The model is painted overall Hellblau as seen on one of the early series production machines

The second kit is now well into the painting stage too - using Xtracolor and WEM Luftwaffe enamels in 82 and 83 this one is being finished as one of the 'striped' machines flown by Maj. Rudolf Sinner of the Stab III./JG 7 'Green 1' (note the German-language caption below states 'Red 1' )

new tool build review Airfix Typhoon IB ( 5) - finished

 New tool Airfix Typhoon. Finished in the markings of Sqd. Ldr Basil 'Gerald' Stapme DFC of 247 Squadron (no. 124 Wing) Eindhoven, December 1944.

Shame about the post-shading, just a tad on the heavy-handed side and a little too dark for my usual mix. Note the off-set tail-wheel and the electrical connectors added to the rockets from fuse wire.

on my 'Jet & Prop' blog;

609 Sqd  Typhoon "PR-L" in Normandy 

new tool Airfix Hawker Typhoon IB 1:72nd scale (4)

..a little and often is my modelling philosophy so I was able to make quite a bit of progress this weekend. As usual I had a bit of a nightmare with my upper surface colours, found it impossible to get a decent finish by airbrush - I wasn't about to mask off each colour with blu-tac sausages - so ended up brush-painting the main camo finish. The end result appeared satisfactory to my eyes so I then proceeded to put the fuselage stripes and band on. I had no intention of using the kit decals for these at all, until I read that they were printed by Cartograph so elected to try them on this build - they went on superbly well! I have subsequently washed some of the panel lines with oils and added the undercarriage (note the weighted wheel..) and rocket rails on one side. The spinner was masked off and airbrushed. I have installed the tail wheel - using a short length of biro refill and cutting off the locating pins I have 'posed' the tail wheel in an off-centre position which I think looks quite convincing and adds to the visual impact of the model..

new tool Airfix Hawker Typhoon IB 1:72nd scale (3)

Day 4 and 5 on the Typhoon. Lots of superglue, clamping and sanding off of locating pins and lugs to get the wings on and even then there were some horrible gaps which in the end were easily and quickly filled with my mix of 'Green stuff' putty thinned with surgical spirit to minimise sanding. The wing tip lights are coloured plastic beads sanded to shape and masked off with Maskol. Elevators cut out and drooped, I wanted to leave the horizontal stabs off until the end so that I could properly mask the fuselage band, but the gaps were frankly too big. I had a good moan elsewhere about modellers complaining about the 'difficulty' of putting together some of these Airfix new tools, but I'm starting to think that a brand new kit shouldn't be this hard to put together! But at half the price of the new Brengun Typhoons I'm not complaining..really I'm not. White primer undersides, the seams aren't too obvious so I may proceed straight to finishing from here..

The lower wing D-day stripes are relatively straight forward to mask up and paint using the kit decals as a guide. However I may use the kit decal for the lower fuselage stripes. The inner gear doors come complete with retraction jacks moulded in situ. Not too sure what colour the rocket rails were so I've painted them on the sprue in the lower surface colour, Humbrol 165 with the 'rail' part finished in aluminium...

new tool Airfix Gloster Gladiator in 1:72nd scale - first look in the box

With a couple of kids in tow - including my 24 year old who is just recuperating from major abdominal surgery - we popped up to Margate and Hornby HQ to pick up one of the new tool Gloster Gladiators. I also managed a whopping £9 discount on a lovely new tool Dambusters Lanc (damaged box..) and nabbed a box of 'Flypast' magazines from the RAF Manston History museum for £3.50. I also got to have a quick look around the museum's Meteor by way of pre-build research for the Cyber Hobby Meteor F.3 I'm planning on doing soon, so all in all quite a successful day despite the pouring rain. Here's a few shots of the Gladiator, which again, like most of these Airfix new tools looks superb in the box! The kit features a detailed cockpit including control column and side wall detail and two canopies, one of which can be posed open. There are also two decal options and a rigging diagram on the instruction sheet...

Strange that Airfix have included the same decal option as the Hobbyboss Gladiator but on all other counts this kit is far superior to the HB offering - it has far more parts than the HB kit for less money (at least in the UK) for a start. From the contents of the box the Airfix kit provides a detailed cockpit, both weighted and 'un-weighted' wheels, two cockpit canopies, detailed multi-part engine, the option of posing the cockpit 'door' open, rigging diagram etc etc..Airfix are also offering a Finnish option with skis..

Tune in to my build elsewhere on this blog......
http://falkeeinsmodel.blogspot.co.uk/2013/07/new-tool-airfix-gloster-gladiator-in.html

and more pics of the finished model are here

new tool Airfix Hawker Typhoon IB 1:72nd scale (2)

Painting and assembling the interior. Lots of parts to keep aligned when closing up the fuselage halves - needless to say this operation didn't go too well! The upper wing access panel has been cut out using my new Trumpeter scriber ( great tool..) and the nicely detailed cannon bay installed in the wing section. The wheel well insert locates onto the lower wing half, which is an extremely thin and 'bendy' part. Everything set aside to dry for tomorrow, a sunny Bank Holiday here, so there should be some more progress ..